Brake Fluid
Check the fluid level in the brake fluid reservoir monthly.
Replace the brake fluid according to the maintenance messages shown on the information display.
Always use Honda Heavy Duty Brake Fluid DOT 3. If it is not available, you should use only DOT 3 or DOT 4 fluid, from a sealed container, as a temporary replacement.
Using any non-Honda brake fluid can cause corrosion and decrease the life of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible.
Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause extensive damage.
The fluid level should be between theMINandMAXmarks on the side of the reservoir. If the level is at or below the MIN mark, your brake system needs attention. Have the brake system inspected for leaks or worn brake pads.
See also:
Emergency Towing
Call a professional towing service if you need to tow your vehicle.
All models
■ Flat bed equipment
The operator loads your vehicle on the back of a truck.
This is the best way to transpor ...
Storing a Position in Memory
1. Turn the ignition switch to ON
. Adjust the driver’s seat and the door mirrors to the desired position.
2. Press the SET button.
You will hear a beep, and the memory button indicator ...
Driving
This section gives you tips on starting the engine under various conditions,
and how to operate the automatic transmission. It also includes important information
on parking your vehicle, the brak ...