Driving Position Memory System*
You can store two driver’s seat and door mirror positions with the driving position memory system.
When you unlock and open the driver’s door with a remote, the seat and door mirrors adjust automatically to one of the two preset positions.
Select either remote you use to unlock the vehicle when you enter.
• DRIVER 1 transmitter is linked to memory button 1.
• DRIVER 2 transmitter is linked to memory button 2.
Models with smart entry system
Models without smart entry system
Models with audio/information screen
Using the audio/information screen, you can disable the automatic seat adjustment function.
■Storing a Position in Memory
1. Turn the ignition switch to ON .
Adjust
the driver’s seat and the door mirrors to the
desired position.
2. Press the SET button.
-You will hear a beep, and the memory button indicator light will blink.
3. Press and hold memory button or within five seconds of pressing the SET button.
- Once the seat and the door mirrors position has been memorized, the indicator light on the button you pressed stays on.
After you press the SET button, the storing operation will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat position before the doublebeep.
• You readjust the door mirrors.
• You turn the ignition switch to any position except
ON .
■Recalling the Stored Position
1. Move the shift lever to .
2. Apply the parking brake.
3. Press a memory button ( or
).
- You will hear a beep, and the indicator light will blink.
The seat and the door mirrors automatically move to the memorized position. When they finish moving, the beeper sounds, and the indicator light stays on.
The seat and the door mirrors stop moving if you:
• Press the SET button, or a memory button (
or
).
• Adjust the seat position.
• Adjust the door mirrors.
• Shift into any position except .
See also:
Playable Discs
The discs that come with these labels can be played in your vehicle’s rear entertainment
system. Also look for the region code of 1 or ALL on the package or jacket on the
disc. DVD-ROMs are not ...
Turn Signals
Turn Signal Control Lever
...
Opening the Hood
1. Park the vehicle on a level surface, and set the parking brake.
2. Pull the hood release handle under the lower left corner of the dashboard.
- The hood will pop up slightly.
3.Push up ...