Instrument Panel Brightness

Honda CR-V / Honda CR-V 2012-2024 Owner's Manual / Instruments and Controls / Instrument Panel Brightness

You can change the instrument panel brightness only when the light switch is

You can change the instrument panel brightness only when the light switch is on.

Turn the knob on the lower part of the instrument panel to adjust the brightness.

You will hear a beep when maximum or minimum brightness is reached.

To reduce glare at night, the instrument panel illumination dims when you turn

To reduce glare at night, the instrument panel illumination dims when you turn the light switch to . Turning the select/ reset knob fully or to the right until you hear a beep will cancel the reduced brightness.. Turning the select/ reset knob fully to the right until you hear a beep will cancel the reduced brightness.

    See also:

    Replacing Light Bulbs
    When replacing, use the following bulbs. High beam headlight: 60W (HB3 for halogen bulb type) Low beam headlight: 55W (H11 for halogen bulb type) NOTICE Halogen bulbs get very hot when lit. Oil ...

    Maintenance Minder™
    If the engine oil life is less than 15%, you will see the Maintenance Minder messages appear on the information display every time you turn the ignition switch to ON . The messages notify you when ...

    Radiator
    1. Make sure the engine and radiator are cool. 2. Turn the radiator cap counterclockwise and relieve any pressure in the coolant system. Do not push the cap down when turning. 3. Push down and tu ...