Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need to manually calibrate the system.
1. Turn the ignition switch to ON
.
2. Press and hold the MENU button until the
display shows the compass setting menu
list.
3. Rotate to select CALIBRATION,
then
press .
4. When the display changes to PUSH CAL
START, press .
5. Drive the vehicle slowly in two circles.
-The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
Calibrate the compass in an open area.
While setting the compass:
• The RETURN button returns to the previous screen.
• The MENU button cancels the setting mode.
These indications are used to show how to operate the selector knob.
Rotate to select.
Press to enter.
See also:
Light Switches
Manual Operation
Rotating the light switch turns the lights on and off, regardless of the
position of the ignition switch.
High beams
Push the lever forward until you hear a click.
Low be ...
Maintenance Minder™
If the engine oil life is less than 15%, you will see the Maintenance Minder
messages
appear on the information display every time you turn the ignition switch to ON
. The messages notify you when ...
Maintenance
...