Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need to manually calibrate the system.
1. Turn the ignition switch to ON
.
2. On the top screen of any audio source,
press and hold 
for 5 seconds.
- The display switches to the Compass
Settings screen.
3. Rotate
to select Calibration,
then press 
.
4. When the display changes to Calibration
Start, press 
.
5. Drive the vehicle slowly in two circles.
- The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
Calibrate the compass in an open area.
While setting the compass, press the BACK button to cancel the setting mode and return to the previous screen.
See also:
When You Cannot Unlock the Fuel Fill Door
■What to Do When Unable to Unlock the Fuel Fill Door
If you cannot unlock the fuel fill door, use the following procedure.
1. Open the tailgate.
2. Pry on the front edge of the cover using ...
Cleaning the Seat Belts
Dirt build-up in the loops of the seat belt anchors can cause the belts to retract
slowly. Wipe the insides of the loops with a clean cloth dampened in mild soap and
warm water or isopropyl alco ...
Safe Driving
You can find many safety recommendations throughout this chapter, and
throughout this manual. ...