Compass Zone Selection
1. Turn the ignition switch to ON
.
2. On the top screen of any audio source,
press and hold for 5 seconds.
- The display switches to the Compass
Settings screen.
3. Rotate to select Zone Adjust,
then
press .
-The display shows the current zone
number.
4. Rotate to select the zone
number of
your area (See Zone Map), then press
.
The zone selection is done to compensate the variation between magnetic north and true north.
If the calibration starts while the audio system is in use, the display returns to normal after the calibration is completed.
See also:
Audio System Theft Protection
Models without navigation system
The audio system is disabled when it is disconnected from the power source, such
as when the battery is disconnected or goes dead.
Reactivating the audio system
1. ...
Types of Airbags
Your vehicle is equipped with three types of airbags:
• Front airbags: Airbags in front of the driver's and front passenger's seats.
• Side airbags: Airbags in the driver's and fr ...
Locking/Unlocking the Doors Using a Key
Fully insert the key and turn it.
Locking/Unlocking the Doors Using a Key
When you lock the driver's door with a key, all of the other doors and tailgate
lock at the same time. When unlocking ...