Front Turn Signal/Parking Light Bulbs
When replacing, use the following bulbs.
Front Turn Signal/Parking: 24/2.2CP
Driver side
6-cylinder models
1. Unlock the holding clips, then remove the
upper part of the air intake duct and the air
intake tube.
Passenger side
All models
1. Remove the engine coolant reservoir.
2. Turn the socket to the left and remove it.
3. Push in the old bulb, rotate to the left until
it unlocks, and remove.
4. Insert new bulb
See also:
Gauges.
Gauges include the speedometer, tachometer, fuel gauge, and related indicators.
They are displayed when the ignition switch is in ON
Speedometer
Displays your driving speed in mph (U.S.) or km/h ...
When You Cannot Unlock the Fuel Fill Door
■What to Do When Unable to Unlock the Fuel Fill Door
If you cannot unlock the fuel fill door, use the following procedure.
1. Open the tailgate.
2. Pry on the front edge of the cover using ...
Automatic Transmission
Creeping
The following conditions cause the engine to run at high revolutions, and increase
creeping:
Immediately after the engine starts.
When the climate control system is in use.
Keep the brak ...