Brake/Taillights, Back-Up Light, Rear Turn Signal Light and Rear Side Marker Light Bulbs

Honda Crosstour / Honda Crosstour 2010-2024 Owner's Manual / Maintenance / Replacing Light Bulbs / Brake/Taillights, Back-Up Light, Rear Turn Signal Light and Rear Side Marker Light Bulbs

When replacing, use the following bulbs.

Brake/Taillight: 21/5 W
Back-Up Light: 21 W
Rear Turn Signal Light: 21 W (Amber)
Rear Side Maker Light: 3 CP

1. Pry on the edge of the cover using a flat-tip

1. Pry on the edge of the cover using a flat-tip screwdriver to remove the covers.
- Wrap the flat-tip screwdriver with a cloth to prevent scratches.

2. Use a Phillip-head screwdriver to remove

2. Use a Phillip-head screwdriver to remove the bolts.
3. Pull the light assembly out of the rear pillar.

4. Turn the socket to the left and remove it.

4. Turn the socket to the left and remove it.

Remove the old bulb.
5. Insert a new bulb.

    See also:

    Using HFL
    Models without navigation system Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using your vehicle’s audio system, without handling your cell phone. Models with t ...

    Jump Starting
    Jump Starting Procedure Turn off the power to electric devices, such as audio and lights. Turn off the engine, then open the hood. 1. Connect the first jumper cable to your vehicle's termin ...

    Audio System
    Audio system without touch screen Models without navigation system Audio system with touch screen *1: Icons that appear on the screen vary by the source selected. Models with navigation syst ...