Changing the Front Wiper Blade Rubber
1. Lift the driver side wiper arm first, then the passenger side.
2. Pry on the edge of the lock tab using a flattip
screwdriver to push it up.
- Wrap the flat-tip screwdriver with a cloth
to prevent scratches.
3. Slide the blade from the wiper arm.
NOTICE
Avoid dropping the wiper arm; it may damage the windshield.
4. Slide the wiper blade out from its holder by pulling the tabbed end out.
5. Remove the retainers from the rubber blade
that has been removed, and mount to a
new rubber blade.
- Correctly align the rubber protrusion and
the retainer grooves.
6. Slide the new wiper blade onto the holder
from the bottom end.
- The tab on the holder should fit in the
indent of the wiper blade.
7. Slide the wiper blade onto the wiper arm,
then push down the lock tab.
8. Lower the passenger side wiper arm first,
then the driver side.
See also:
Playing the XM® Radio
To Play the XM® Radio
1. Press the button to select the
XM® radio band (XM1 or XM2).
2. Press and hold the TITLE button to switch between the channel mode
and category mode.
If you press ...
Automatic Climate Control Sensors
The automatic climate control system is equipped with a sunlight sensor, an interior
temperature and humidity sensor. Do not cover or spill any liquid on them.
...
Audio System Basic Operation
Models without navigation system
To use the audio system function, the ignition switch must be in ACCESSORY
or ON
.
Use the selector knob or SETUP button to access some audio functions.
...