Remote Transmitter Care
Replacing the Button Battery
If the indicator does not come on when the button is pressed, replace the battery.
NOTICE
An improperly disposed of battery can damage the environment. Always confirm local regulations for battery disposal.
Replacement batteries are commercially available or at a dealer.
■Master Keys with Remote Transmitter*
Battery type: CR1620
1. Unscrew the cover with a small Phillipshead
screwdriver.
2. Open the remote transmitter.
- Wrap the small flat-tip screwdriver with a
cloth to prevent scratching the
transmitter.
3. Remove the button battery with the small
flat-tip screwdriver.
4. Make sure to replace the battery with the
correct polarity.
■Smart Entry Remote*
Battery type: CR2032
1. Remove the built-in key.
2. Remove the upper half by carefully prying
on the edge with a coin.
- Remove carefully to avoid losing the
buttons.
- Wrap a coin with a cloth to prevent
scratching the smart entry remote.
3. Make sure to replace the battery with the
correct polarity.
See also:
Instrument Panel
This chapter describes the buttons, indicators, and gauges that are used while
driving. ...
Low Oil Pressure Indicator
Low Oil Pressure Indicator
This indicator should never come on when the engine is running. If it starts
flashing or stays on, the oil pressure has dropped very low or lost pressure. Serious
eng ...
Engine start/stop Button*
ENGINE START/STOP Button Operating Range
You can start the engine when the smart entry
remote is inside the vehicle.
The engine may also run if the smart entry remote is
close to the door or w ...