If the Smart Entry Remote Battery is Weak
Models with smart entry system
If the beeper sounds, the indicator on the ENGINE START/STOP button flashes, and the engine won’t start.
Start the engine as follows.
1. Touch the center of the ENGINE START/ STOP button with the H logo on the smart entry remote while the indicator on the ENGINE START/STOP button is flashing.
The buttons on the smart entry remote
should be facing you.
- The indicator flashes for about 30
seconds.
2. Depress the brake pedal and press the
ENGINE START/STOP button within 10
seconds after the beeper sounds and the
indicator stays on.
- If you don’t depress the pedal, the mode
will change to ACCESSORY.
See also:
Additional Information About Your Seat Belts
Seat Belt System Components
Your seat belt system includes lap/ shoulder belts in all seating positions.
The front seat belts are also equipped with automatic seat belt tensioners.
This system uses ...
General Information
Your vehicle has been designed primarily for use on pavement, however, its higher
ground clearance allows you to occasionally travel on unpaved roads. It is not designed
for trail-blazing, or other ...
Resetting the Display
Reset the engine oil life display if you have performed the maintenance service.
1. Turn the ignition switch to ON
.
2. Display the engine oil life by repeatedly pressing the
(Select/Reset) kn ...