Seat Belt Reminder
Your vehicle monitors front seat belt use. If the ignition switch is turned to ON before the driver's seat belt is fastened, a beeper will sound and the indicator will blink. If the driver does not fasten the belt before the beeper stops, the indicator will remain on. The beeper will also periodically sound and the indicator will blink while driving until the driver's and front passenger’s seat belts are fastened.
About Your Seat Belts
If a rear seat passenger moves around and extends the seat belt, the lockable retractor may activate. If this happens, release the retractor by unfastening the seat belt and allow the belt to retract completely. Then refasten the belt.
Seat Belt Reminder
The indicator will also come on if a front passenger does not fasten their seat belt within 6 seconds after the ignition switch is turned to ON .
When no one is sitting in the front passenger's seat, or a child or small adult is riding there, the indicator will not come on. This is because the weight sensors in the seat cannot detect their presence.
See also:
Playing a USB Flash Drive
Your audio system reads and plays sound files on a USB flash drive in either
MP3, WMA or AAC 1 format.
Connect your USB flash drive to the USB adapter cable, then press the USB/AUX
button.
How ...
Precautions While Driving
■In Rain
Avoid driving in deep water and on flooded roads. This can damage the engine
or
driveline, or cause electrical component failure.
■Other Precautions
If there is a strong imp ...
Cruise Control
• Cruise control allows you to maintain a set speed without keeping your foot
on the accelerator pedal.
• To use cruise control, press the CRUISE button, then press DECEL/SET button once
you h ...