Fastening a Seat Belt
After adjusting a front seat to the proper position, and while sitting upright and well back in the seat:
1.Pull the seat belt out slowly.
2.Insert the latch plate into the buckle, then tug on the belt to make sure the buckle is secure.
Make sure that the belt is not twisted or caught on anything.
Fastening a Seat Belt
No one should sit in a seat with an inoperative seat belt or one that does not appear to be working correctly. Using a seat belt that is not working properly may not protect the occupant in a crash. Have a dealer check the belt as soon as possible.
Never insert any foreign objects into the buckle or retractor mechanism.
3.Position the lap part of the belt as low as possible across your hips, then pull up on the shoulder part of the belt so the lap part fits snugly. This lets your strong pelvic bones take the force of a crash and reduces the chance of internal injuries.
4.If necessary, pull up on the belt again to remove any slack, then check that the belt rests across the center of your chest and over your shoulder. This spreads the forces of a crash over the strongest bones in your upper body.
See also:
Key Types and Functions
This vehicle comes with the following keys:
Master Keys
Use the keys to start and stop the engine, and to lock and unlock all the doors
and tailgate. You can also use the remote transmitter to lock ...
If the TPMS Indicator Comes On
Reasons for the indicator to come on
- Comes on when there is a problem with the TPMS.
- If the compact spare is installed, the indicator comes on after driving
for a few miles (kilom ...
Rear Seats
Folding Down the Second Row Seats
The second row seats can fold down separately to allow for additional storage
space.
To fold down the seat
1. Store the center seat belt first. Insert the latch ...