Seat Belt with Detachable Anchor
1. Pull out the seat belt’s small latch plate and the latch plate from each holding slot in the ceiling.
2. Line up the triangle marks on the small latch plate and anchor buckle. Make sure the seat belt is not twisted. Attach the belt to the anchor buckle.
3. Insert the latch plate into the buckle. Properly fasten the seat belt the same way you fasten the lap/shoulder seat belt.
Seat Belt with Detachable Anchor
WARNING
Using the seat belt with the detachable anchor unlatched increases the chance of serious injury or death in a crash. Before using the seat belt, make sure the detachable anchor is correctly latched.
To unlatch the detachable anchor, insert the latch plate into the slot on the side of the anchor buckle.
See also:
Checking the Engine
If the engine does not start, turn the ignition switch to START (e*1 and
check the
starter.
If you must start the vehicle immediately, use an
assisting vehicle to jump start it.
...
Armrest
Using the Front Seat Armrest
The console lid can be used as an armrest.
Using the Second Row Seat Armrest
Pull down the armrest in the center seat-back.
...
Unlocking the Tailgate
If the power door lock system cannot unlock the tailgate, unlock it manually.
Place a cloth on the top side of the cover to prevent scratches, then use a small
flat-tip screwdriver to remove the ...