Storing a Position in Memory
1. Turn the ignition switch to ON . Adjust the driver’s seat and the door mirrors to the desired position.
2. Press the SET button.
You will hear a beep, and the memory button indicator light will blink.
3.Press and hold memory button or within five seconds of pressing the SET button.
Once the seat and the door mirror positions have been memorized, the indicator light on the button you pressed stays on.
Storing a Position in Memory
After you press the SET button, the storing operation will be canceled when:
• You do not press the memory button within five seconds.
• You readjust the seat position before the doublebeep.
• You readjust the door mirrors.
• You turn the ignition switch to any position except ON
.
See also:
If the EPS System Indicator Comes On
6-cylinder models
■ Reasons for the indicator to come on
• Comes on when there is a problem with EPS system.
• If you depress the accelerator pedal repeatedly to increase the engine
sp ...
Tire Pressure Monitoring System (TPMS) - Required Federal Explanation
Each tire, including the spare (if provided), should be checked monthly when
cold and inflated to the inflation pressure recommended by the vehicle manufacturer
on the vehicle placard or tire inflat ...
Warranty Coverages
U.S. Owners
Your new vehicle is covered by these warranties:
New Vehicle Limited Warranty – covers your new vehicle, except for the
emissions control systems and accessories, against defects in m ...