Radiator
1. Make sure the engine and radiator are cool.
2. Turn the radiator cap counterclockwise and relieve any pressure in the coolant system. Do not push the cap down when turning.
3. Push down and turn the radiator cap counterclockwise to remove it.
4. The coolant level should be up to the base of the filler neck. Add coolant if it is low.
5. Put the radiator cap back on, and tighten it fully.
6. Pour coolant into the reserve tank until it reaches the MAX mark. Put the cap back on the reserve tank.
Radiator
WARNING
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you. Always let the engine and radiator cool down before removing the radiator cap.
NOTICE
Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.
See also:
Automatic Answering
You can choose when the HFL system automatically answers incoming calls.
1. Press the PHONE button or the
button.
2.Rotate to select Phone Setup,
then press .
- Repeat the procedure to ...
Authorized Manuals
■ Service Express
For electronic copies of service publications, you can purchase a subscription
to
Service Express. Visit www.techinfo.honda.com for pricing and options.
■ For U.S. O ...
Checking Tires
To safely operate your vehicle, your tires must be of the proper type and size,
in good condition with adequate tread, and properly inflated.
Inflation guidelines
Properly inflated tires provide th ...