Brake Light, Taillight, Back-Up Light, Rear Turn Signal Light and Rear Side Marker Light Bulbs
When replacing, use the following bulbs.
Brake/Taillight: 21/5 W
Back-Up Light: 18 W
Rear Turn Signal/Taillight: 21/5 W
Rear Side Marker Light: 5 W
1. Use a Phillips-head screwdriver to remove the bolts.
2. Loosen the assembly by carefully prying on the top and side edges.
- Wrap the flat-tip screwdriver with a cloth to prevent scratches.
3. Turn the socket to the left and remove it. Remove the old bulb.
4. Insert a new bulb.
5. Reinstall the light assembly by sliding it into the hole on the body.
See also:
Adjusting the Seat Positions
Adjust the driver's seat as far back as possible while allowing you to maintain
full control of the vehicle. You should be able to sit upright, well back in the
seat and be able to adequately ...
Tire Labeling
The tires that came on your vehicle have a number of markings. Those you should
be aware of are described below.
Tire Sizes
Whenever tires are replaced, they should be replaced with tires of the ...
Visual Index
*1: Models with the smart entry system have an ENGINE START/STOP
button instead of an ignition switch.
...