Inspecting and Changing Fuses

Honda Pilot / Honda Pilot 2009-2024 Owner's Manual / Handling the Unexpected / Fuses / Inspecting and Changing Fuses

1. Turn the ignition switch to LOCK

1. Turn the ignition switch to LOCK off. . Turn headlights and all accessories off.

2. Remove the fuse box cover.

3. Check the large fuse in the engine compartment.

 - If the fuse is blown, use a Phillips-head screwdriver to remove the screw and replace it with a new one.

4. Inspect the small fuses in the engine compartment and the vehicle interior.

4. Inspect the small fuses in the engine compartment and the vehicle interior.

 - If there is a burned out fuse, remove it with the fuse puller and replace it with a new one.

Inspecting and Changing Fuses

NOTICE

Replacing a fuse with one that has a higher rating greatly increases the chances of damaging the electrical system. Replace fuse with a spare fuse of the same specified amperage.

Confirm the specified amperage using the charts on

There is a fuse puller on the back of the engine compartment fuse box cover.

    See also:

    Automatic Transmission
    ● Shift to and depress the brake pedal when starting the engine. Shifting Models without paddle shifter Models with paddle shifter Depress the brake pedal and press the release but ...

    Protecting Child Passengers
    Each year, many children are injured or killed in vehicle crashes because they are either unrestrained or not properly restrained. In fact, vehicle accidents are the number one cause of death of chi ...

    Charging System Indicator
    If the charging system indicator comes on brightly when the engine is running, the battery is not being charged. Immediately turn off all electrical accessories. Try not to use other electrically ...