Playing a CD
Your audio system supports audio CDs, CD-Rs and CD-RWs in either MP3, WMA, or AAC format. With the CD loaded, press the CD button.
How to Select a File from a Folder with the Selector Knob (MP3/WMA/AAC)
1. Press to switch the display to a folder list.
2. Rotate to select a folder.
3. Press to change the display to a list of files in that folder.
4. Rotate to select a file, then press .
Playing a CD
NOTICE
Do not use CDs with adhesive labels. The label can cause the CD to jam in the
unit. WMA files protected by digital rights management (DRM) cannot be played. The
audio system displays UNSUPPORTED, then skips to the next file. Text data appears
on the display under the following circumstances:
• When you select a new folder, file, or track.
• When you change the audio mode to CD.
• When you insert a CD. If you eject the CD but do not remove it from the slot,
the system reloads the CD automatically after several seconds.
How to Select a Play Mode
You can select repeat, random, and scan modes when playing a track or file.
1.Press the SETUP button.
2. Rotate to select Play Mode, then press .
3. Rotate to select a mode, then press .
To turn off a play mode
1.Press the SETUP button.
2. Rotate to select Play Mode, then press .
3. Rotate to select Normal Play, then press .
How to Select a Play Mode
Press the RETURN button to go back to the previous display, and press the SETUP button to cancel this setting mode.
Play Mode Menu Items
Normal Play
Repeat One Track: Repeats the current track/file(s).
Repeat One Folder (MP3/WMA/AAC): Repeats all files in the current folder.
Random in Folder (MP3/WMA/AAC): Plays all files in the current folder in random order.
Random in Disc: Plays all tracks/files in random order.
Scan Tracks: Samples all tracks on the CD. (MP3/WMA/AAC): Samples all files in the current folder.
Scan Folders (MP3/WMA/AAC): Samples the first file in each folder.
See also:
Song By VoiceTM (SBV)
Use SBV to search for and play music from your HDD or iPod® using voice
commands.
■ To enable SBV
1. Press the SETTINGS button.
2. Rotate to select System
Settings, then
press .
3. Ro ...
Inspecting and Changing Fuses
1. Turn the ignition switch to LOCK
. Turn headlights and all accessories
off.
2. Remove the fuse box cover.
3. Check the large fuse in the engine compartment.
- If the fuse is blown, u ...
Starting the Engine
Models without smart entry system
1. Make sure the parking brake is applied.
2. Check that the shift lever is in
, then
depress the brake pedal.
- Although it is possible to start the vehicle ...