See also:

Seat Belt Inspection
Regularly check the condition of your seat belts as follows: • Pull each belt out fully, and look for frays, cuts, burns, and wear. • Check that the latches work smoothly and the belts retract e ...

Wiper Blades
Check the condition of the wiper blades at least every six months. Replace them if you find signs of cracking in the rubber, areas that are getting hard, or if they leave streaks and unwiped areas ...

Daytime Running Lights
The high beam headlights come on slightly dimmer than normal when the following conditions have been met: The ignition switch is in ON . The headlight switch is off, or in  . The lights rem ...