Parking Brake

To apply the parking brake, push the pedal down with your foot. To release it, push on the pedal again.
The parking brake indicator on the instrument panel should go out when the parking brake is fully released.

Driving the vehicle with the parking brake applied can damage the rear brakes and hubs. A beeper will sound if the vehicle is driven with the parking brake on.
See also:
Multi-View Rear Camera
About Your Multi-View Rear Camera
Models with navigation system
For models with the navigation system, see the Navigation System Manual. ...
Fuse Locations
If any electrical devices are not working,
turn the ignition switch to LOCK
and
check to see if any applicable fuse is blown.
■Engine Compartment Fuse Box
Located near the brake fluid res ...
Windshield Washers
Check the fluid level in the windshield washer reservoir at least monthly during
normal use.
Check the fluid level by removing the cap and looking at the level gauge.
On Canadian models: The low ...






