Adding Engine Oil

Honda Crosstour / Honda Crosstour 2010-2026 Owner's Manual / Maintenance / Maintenance Under the Hood / Adding Engine Oil

1. Unscrew and remove the engine oil fill cap.

1. Unscrew and remove the engine oil fill cap.
2. Add oil slowly.
3. Reinstall the engine oil fill cap, and tighten it securely.
4. Wait for three minutes and recheck the engine oil dipstick.

If any oil spills, wipe it up immediately. Spilled oil may damage the engine compartment components.

NOTICE

Do not fill the engine oil above the upper mark.

Overfilling the engine oil can result in leaks and Engine Oil Fill Cap engine damage.

    See also:

    Voice Control Operation
    Your vehicle has a voice control system that allows hands-free operation of most of the navigation system functions. The voice control system uses the (Talk) and (hang-up/back) buttons on ...

    Brake Light, Taillight, Back-Up Light, Rear Turn Signal Light and Rear Side Marker Light Bulbs
    When replacing, use the following bulbs. Brake/Taillight: 21/5 W Back-Up Light: 18 W Rear Turn Signal/Taillight: 21/5 W Rear Side Marker Light: 5 W 1. Use a Phillips-head screwdriver to remove ...

    Seats
    Driver’s Seat Power Adjustments EX-L and Canadian EX models See pages for important safety information and warnings about how to properly position the seats and seatbacks. The controls for the ...