Synchronized Mode
You can set the temperature synchronously for the driver side, the passenger side, and the rear passenger compartment in synchronized mode.
1. Press the SYNC button.
The system will switch to synchronized mode.
2. Adjust the temperature using driver’s side temperature control dial.
Press the SYNC button to return to dual mode.
Synchronized Mode
When you press the 
button, the
system changes to synchronized mode. When the system is in tri-zone mode, the driver
side temperature, the passenger side temperature, and the rear passenger compartment
(if it is on) can be set separately.
See also:
Seat Belt with Detachable Anchor
1. Pull out the seat belt’s small latch plate and the latch plate from each holding
slot in the ceiling.
2. Line up the triangle marks on the small latch plate and anchor buckle. Make
sure the ...
Checking the Battery
Check the battery condition monthly. Look at
the test indicator window and check the
terminals for corrosion.
If your vehicle’s battery is disconnected or goes dead:
• The audio system is di ...
Engine Coolant
Adding Engine Coolant
If the coolant level in the reserve tank is at or below the MIN line, add coolant
to bring it up to the MAX line.
Inspect the cooling system for leaks.
Always use Honda Lo ...