Automatic Transmission
Creeping
The following conditions cause the engine to run at high revolutions, and increase creeping:
Immediately after the engine starts.
When the climate control system is in use.
Keep the brake pedal firmly depressed when stopped.
Kickdown
Quickly depressing the accelerator pedal while driving uphill may cause the transmission to drop to a lower gear, unexpectedly increasing vehicle speed. Depress the accelerator pedal carefully, especially on slippery roads and curves.
See also:
Starting the Engine
1. Apply the parking brake.
2. In cold weather, turn off all electrical accessories to reduce the drain on
the battery.
3. Make sure the shift lever is in Park. Press on the brake pedal.
4. Witho ...
Additional Information About Your Seat Belts
Seat Belt System Components
Your seat belt system includes lap/ shoulder belts in all seating positions.
The front seat belts are also equipped with automatic seat belt tensioners.
This system uses ...
Checking the Engine
If the engine does not start, turn the ignition switch to START (e*1 and
check the
starter.
If you must start the vehicle immediately, use an
assisting vehicle to jump start it.
...