See also:

Instrument Panel Brightness
You can change the instrument panel brightness only when the light switch is on. Turn the knob on the lower part of the instrument panel to adjust the brightness. You will hear a beep when maxim ...

Changing the Rear Wiper Blade Rubber
1. Raise the wiper arm off. 2. Pivot the bottom end of the wiper blade up until it comes off from the wiper arm. 3. Slide the blade out of the wiper. 4. Remove the retainers from wiper blade ...

Daytime Running Lights
The high beam headlights come on slightly dimmer than normal when the following conditions have been met: • The ignition switch is in ON . • The headlight switch is off, or in . • The park ...