Daytime Running Lights
The high beam headlights come on slightly dimmer than normal when the following conditions have been met:
• The ignition switch is in ON
.
• The headlight switch is off, or in
.
• The parking brake is released.
The lights remain on even if you set the parking brake. Turning off the ignition switch or setting the power mode to VEHICLE OFF will turn off the daytime running lights.
The high beam headlights return to the original brightness once the headlight switch is turned on.
See also:
Airbag Care
You do not need to, and should not, perform any maintenance on or replace any
airbag system components yourself. However, you should have your vehicle inspected
by a dealer in the following situatio ...
Defaulting All the Settings
Reset all the menu and customized settings as the factory defaults.
1. Press the SETTINGS button.
2. Rotate to select System
Settings, then
press .
3. Rotate to select Other,
then press .
4 ...
Service Station Procedures
Refueling
1. Park with the driver’s side closest to the service station pump.
2. Open the fuel fill door by pulling on the handle located under the lower left
corner of the dashboard.
3. Re ...






