Instrument Panel Brightness

Honda CR-V / Honda CR-V 2012-2026 Owner's Manual / Instruments and Controls / Instrument Panel Brightness

You can change the instrument panel brightness only when the light switch is

You can change the instrument panel brightness only when the light switch is on.

Turn the knob on the lower part of the instrument panel to adjust the brightness.

You will hear a beep when maximum or minimum brightness is reached.

To reduce glare at night, the instrument panel illumination dims when you turn

To reduce glare at night, the instrument panel illumination dims when you turn the light switch to . Turning the select/ reset knob fully or to the right until you hear a beep will cancel the reduced brightness.. Turning the select/ reset knob fully to the right until you hear a beep will cancel the reduced brightness.

    See also:

    Vehicle Identification Number (VIN)
    Your vehicle has a 17-digit vehicle identification number (VIN) used to register your vehicle for warranty purposes, and for licensing and insuring your vehicle. See the image below for the VIN ...

    Front Turn Signal/Parking Light and Front Side Marker Light Bulbs
    When replacing, use the following bulbs. Front Turn Signal/Parking Light: 28/8 W (Amber) Front Side Marker Light: 3CP 1. Turn the socket to the left and remove it. 2. Remove the old bulb and ins ...

    HazardWarning Button
    Push the button between the center vents to turn on the hazard warning lights (four-way flashers). This causes all four outside turn signals and both indicators in the instrument panel to flash. ...