Front Turn Signal/Parking Light and Front Side Marker Light Bulbs
When replacing, use the following bulbs.
Front Turn Signal/Parking Light: 28/8 W (Amber)
Front Side Marker Light: 3CP
1. Turn the socket to the left and remove it.
2. Remove the old bulb and insert a new bulb.
See also:
Rear Wiper/Washer
The rear wiper and washer can be used when the ignition switch is in ON
.
Wiper switch (OFF, INT, ON)
Change the wiper switch setting according to the amount of rain.
Washer
Sprays while you ...
Brake System Indicator
The brake system indicator normally comes on when you turn the ignition switch
to the ON (II) position, and as a reminder to check the parking brake. It will stay
on if you do not fully release ...
Avoiding Trouble
Check Out Your Vehicle before you leave the pavement and make sure that
all scheduled maintenance has been completed. Pay special attention to the condition
of the tires, and check the tire pressure ...