Front Side Marker Light Bulb
When replacing, use the following bulbs.
Front Side Marker Light: 5 W
1. Turn the steering wheel all the way to the opposite side from the light being replaced.
Passenger side: Turn the steering wheel
to the left.
Driver side: Turn the steering wheel to the
right.
2. Remove the holding clips and screw, and
pull the inner fender back.
3. Turn the socket to the left and remove it,
then remove the old bulb.
4. Insert a new bulb
Remove the clip by using a flat-tip screwdriver.
See also:
Preparing to Drive
You still need to exercise the same care when accelerating, steering, and braking
that you would in a twowheel drive vehicle.
1. Make sure all windows, mirrors, and outside lights are clean and uno ...
Wipers and Washers
Wiper/Washer Control Lever
...
Important Handling Information
Your CR-V has higher ground clearance than a passenger vehicle designed for use
only on pavement. Higher ground clearance has many advantages for off-highway driving.
It allows you to travel over ...