Resetting the Display
Reset the engine oil life display if you have performed the maintenance service.
1. Turn the ignition switch to ON
.
2. Display the engine oil life by repeatedly pressing the SEL/RESET button.
3. Press and hold the SEL/RESET button for 10 seconds or more.
- The oil life reset mode is displayed on the multi-information display.
4. Select RESET with the 
/ 
button, then press the SEL/RESET
button.
- The service code will disappear and the engine oil life display will return to 100%. To cancel the oil life reset mode, select CANCEL, then press the SEL/RESET button.
Resetting the Display
NOTICE
Failure to reset the engine oil life after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems. The dealer will reset the engine oil life display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.
See also:
If the Smart Entry Remote Battery is Weak
Models with smart entry system
If the beeper sounds, the indicator on the ENGINE START/STOP button flashes,
and the engine won’t start.
Start the engine as follows.
1. Touch the center of th ...
Important Safety Precautions
To avoid loss of control or rollover, be sure to follow all precautions and recommendations:
Be sure to store cargo properly and do not exceed your cargo load limits.
Whenever you drive, make sure y ...
Adjusting the Seat Positions
Adjust the driver’s seat as far back as possible
while allowing you to maintain full control of
the vehicle. You should be able to sit upright,
well back in the seat and be able to
adequately ...