Playing AM/FM Radio
You can control the AM/FM radio using voice commands.
The ST indicator appears on the display indicating stereo FM broadcasts.
Stereo reproduction in AM is not available.
Switching the Audio Mode Press the SOURCE button on the steering wheel.
You can also switch the mode by pressing the MENU button and selecting Change Source on the Audio menu screen.
You can store 6 AM stations and 12 FM stations into the preset memory.
■Preset Memory
To store a station:
1. Tune to the selected station.
Interface Dial
2. Press the MENU button.
3. Rotate to select Save
Preset, then press
.
4. Rotate to select the preset
number you want to store that station, then press
and hold
.
Audio with Touch Screen
2. Select More.
3. Select Save Preset.
4. Select the preset number you want to store that station.
■Radio Data System (RDS)
Provides text data information related to your selected RDS-capable FM station.
■ To find an RDS station from Station List
1. Press the MENU button while listening to an FM station.
2. Rotate to select Station
List, then press
.
3. Rotate to select the station,
then press
.
■ Manual update
Updates your available station list at any time.
1. Press the MENU button while listening to an FM station.
2. Rotate to select Station
List, then press
.
3. Rotate to select
Refresh, then press
.
When you select an RDS-capable FM station, the RDS automatically turns on, and the frequency display changes to the station name. However, when the signals of that station become weak, the display changes from the station name to the frequency.
■ Radio text
Display the radio text information of the selected RDS station.
1. Press the MENU button.
2. Rotate to select Radio
Text, then press
.
The text indicator comes on when you received a text message. The indicator stays on until you read the message.
■ Scan
Samples each of the strongest stations on the selected band for 10 seconds.
Interface Dial
1. Press the MENU button.
2. Rotate to select Scan,
then press
.
To turn off scan, press to select
Cancel Scan, or press the BACK button.
Audio with Touch Screen
1. Select More.
2. Select Scan.
To turn off scan, select Cancel Scan.
See also:
Power Door Mirrors
● With the ignition switch in ON ,
move
the selector switch to L or R.
● Push the appropriate edge of the
adjustment switch to adjust the mirror.
...
Opening the Hood
1. Park the vehicle on a level surface, and set
the parking brake.
2. Pull the hood release handle under the
lower left corner of the dashboard.
- The hood will pop up slightly.
3. Push up th ...
Resetting the Display
Reset the engine oil life display if you have performed the maintenance service.
1. Turn the ignition switch to ON
.
2. Display the engine oil life by repeatedly pressing the
(Select/Reset) kn ...