Clock
Models without navigation system
1. Press the CLOCK button to access the clock adjustment mode screen.
2. Press 
to select the item you want
to adjust (12/24 hour mode, hour, minutes).
3. Rotate 
to make the adjustment.
4. Press to enter your selection.
Repeat steps 2 to 4 to adjust other items.
5. To enter the selection, press
and select EXIT, then press .
Models with navigation system
The navigation system receives signals from GPS satellites, updating the clock automatically.
See also:
Rear License Plate Light Bulb
When replacing, use the following bulb.
Rear License Plate Light: 5 W
1. Push the left edge of the lens to the right
and pull out the licence light assembly.
2. Push the tabs to remove the len ...
Audio Remote Controls
Allows you to operate the audio system while driving.
SOURCE Button
Cycles through the audio modes as follows:
FM → AM →XM*
→CD →HDD*
→USB→
iPod® →Bl ...
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator
blinks, you need
to manually calibrate the system.
1. Turn the ignition switch to ON
.
2. Press and hold the MENU button unti ...