Power Door Mirrors
With the ignition switch in ON 
,
move the selector switch to L or R.
Push the appropriate edge of the adjustment switch to adjust the mirror.
Place the selector switch in the L or R position to use the reverse tilt door mirror feature.
See also:
Jump Starting
■Jump Starting Procedure
Turn off the power to electric devices, such as audio and lights. Turn off
the engine,
then open the hood.
1. Connect the first jumper cable to your
vehicle’s ...
Rear License Plate Light Bulb
When replacing, use the following bulb.
Rear License Plate Light: 5 W
1. Push the left edge of the lens to the right
and pull out the licence light assembly.
2. Push the tabs to remove the len ...
Safety Checklist
For the safety of you and your passengers, make a habit of checking these items
each time before you drive.
• After everyone has entered the vehicle, be sure all doors and the tailgate are
close ...