See also:

Reserve Tank
1. Check the amount of coolant in the reserve tank. 2. If the coolant level is below the MIN mark, add the specified coolant until it reaches the MAX mark. 3. Inspect the cooling system for leaks ...

Changing the Rear Wiper Blade Rubber
1. Raise the wiper arm off. 2. Pivot the bottom end of the wiper blade up until it comes off from the wiper arm. 3. Slide the blade out of the wiper. 4. Remove the retainers from wiper blade ...

Jump Starting
Jump Starting Procedure Turn off the power to electric devices, such as audio and lights. Turn off the engine, then open the hood. 1. Connect the first jumper cable to your vehicle's termin ...