Cruise Control
• Cruise control allows you to maintain a set speed without keeping your foot
on the accelerator pedal.
• To use cruise control, press the CRUISE button, then press DECEL/SET button once
you have achieved the desired speed (above 25 mph or 40 km/h).
See also:
Changing the Wiper Blade Rubber
1. Lift the driver side wiper arm first, then the passenger side.
2. Press and hold the tab, then slide the blade from the wiper arm.
Changing the Wiper Blade Rubber
NOTICE
Avoid dropping the ...
Emissions Testing
Testing of Readiness Codes
Your vehicle uses “readiness codes,” as part of its onboard self diagnostic system.
Some states refer to these codes during testing to see if your vehicle's emissi ...
Daytime Running Lights
The high beam headlights come on slightly dimmer than normal when the following
conditions have been met:
The ignition switch is in ON .
The headlight switch is off, or in
.
The lights rem ...