Seat Belt with Detachable Anchor
1. Pull out the seat belt’s small latch plate and the latch plate from each holding slot in the ceiling.

2. Line up the triangle marks on the small latch plate and anchor buckle. Make sure the seat belt is not twisted. Attach the belt to the anchor buckle.

3. Insert the latch plate into the buckle. Properly fasten the seat belt the same way you fasten the lap/shoulder seat belt.

Seat Belt with Detachable Anchor
WARNING
Using the seat belt with the detachable anchor unlatched increases the chance of serious injury or death in a crash. Before using the seat belt, make sure the detachable anchor is correctly latched.
To unlatch the detachable anchor, insert the latch plate into the slot on the side of the anchor buckle.

See also:
Parking Brake
To apply the parking brake, push the pedal down with your foot. To release it,
push on the pedal again.
The parking brake indicator on the instrument panel should go out when the parking
brake ...
HFL Menus
The ignition switch must be in ACCESSORY
or ON
to use HFL.
■ Phone Settings screen
1. Press the DISP button.
2. Rotate to select Settings, then
press .
3. Rotate to select Phone Se ...
Emergency Towing
Call a professional towing service if you need to tow your vehicle.
All models
■ Flat bed equipment
The operator loads your vehicle on the back of a truck.
This is the best way to transpor ...






