Dual Temperature Control

Honda CR-V / Honda CR-V 2012-2026 Owner's Manual / Features / Dual Temperature Control

EX-L model only

EX-L model only

The temperatures of the driver’s side and the front passenger’s side can be controlled independently when the indicator in the DUAL button is on.

To adjust the driver’s side, turn the driver’s side temperature control dial on the climate control panel. To adjust the passenger’s side, turn the passenger’s side temperature control dial.

Temperature Control

Push AUTO or appear in the display.. The selected temperatures appear in the display.

When the indicator in the DUAL button is off, you can adjust both sides to the same temperature by adjusting the driver’s temperature control dial.

To set the driver’s side temperature to a different value than the passenger’s

To set the driver’s side temperature to a different value than the passenger’s side, press the DUAL button, then turn the temperature control dial on the control panel. To set the passenger’s side to a different value than the driver’s side, turn the passenger’s side temperature control dial. You can adjust the passenger’s side without pressing the DUAL button first.

When you set the temperature to its lower limit or its upper limit, it will be displayed as ‘‘Lo’’ or ‘‘Hi’’.

Climate Control Sensors

Sunlight and Temperature Sensors

The climate control systemhas two sensors: a sunlight sensor on top of the dashboard,

The climate control systemhas two sensors: a sunlight sensor on top of the dashboard, and a temperature and humidity sensor next to the steering column. Do not cover the sensors or spill any liquid on them.

Audio System

    See also:

    If the Low Tire Pressure Indicator Comes On
    Reasons for the indicator to come on A tire pressure is significantly low. If the compact spare tire is installed, the indicator stays on for a while, then goes off after driving a few miles (kilo ...

    Your Vehicle at a Glance
    ...

    Displaying the Engine Oil Life
    1. Turn the ignition switch to ON . 2. Press the (Select/Reset) knob repeatedly until the engine oil life appears on the information display. The Maintenance Minder indicator   &nbs ...