Shift Lever Does Not Move
Follow the procedure below if you cannot move the shift lever out of the
position.
Releasing the Lock
1. Set the parking brake.
2. Remove the key from the ignition switch.
3. Wrap a cloth around the tip of a small flattip screwdriver. Put it into the shift lock release slot as shown in the image, and remove the cover.
4. Insert the key into the shift lock release slot.
5. While pushing on the key, press the shift lever release button and place the
shift lever into 
.
- The lock is now released. Have the shift lever checked by a dealer as soon as possible.
See also:
Brake/Taillights, Back-Up Light, Rear Turn Signal Light and Rear Side Marker
Light Bulbs
When replacing, use the following bulbs.
Brake/Taillight: 21/5 W
Back-Up Light: 21 W
Rear Turn Signal Light: 21 W (Amber)
Rear Side Maker Light: 3 CP
1. Pry on the edge of the cover using a fla ...
Forward Collision Warning (FCW)
Alerts you when it detects the possibility of your vehicle colliding with the
vehicle in
front of yours.
If the system determines a collision is possible, it gives both visual and
audible alerts ...
Synchronized Mode
You can set the temperature synchronously for the driver side, the passenger
side, and the rear passenger compartment in synchronized mode.
1. Press the SYNC button.
The system will switch to syn ...