Daytime Running Lights
The high beam headlights come on slightly dimmer than normal when the following conditions have been met:
The ignition switch is in ON 
.
The headlight switch is off, or in
.
The lights remain on even if you set the parking brake. Turning off the ignition switch will turn off the daytime running lights. The high beam headlights return to the original brightness once the headlight switch is turned on.
See also:
Safety Labels
These labels are in the locations shown. They warn you of potential hazards that
could cause serious injury or death. Read these labels carefully.
If a label comes off or becomes hard to read (exce ...
Light Switches
Manual Operation
Rotating the light switch turns the lights on and off, regardless of the
position of the ignition switch.
High beams
Push the lever forward until you hear a click.
Low be ...
Heating and Cooling System*
Using Vents, Heating and A/C
■Heating
The heater uses heat from the engine coolant
to warm the air.
1. Adjust the fan speed using the fan control
dial.
2. Select .
3. Adjust the tempe ...