Recalling the Stored Position
1.Move the shift lever to 
.
2. Apply the parking brake.
3. Press a memory button ( 
or
) .
You will hear a beep, and the indicator light will blink.
The seat and the door mirrors will automatically move to the memorized positions. When they have finished moving, you will hear a beep, and the indicator light stays on.
Recalling the Stored Position
The seat and the door mirrors will stop moving if you:
Press the SET button, or a memory button (
or
).
Adjust the seat position.
Adjust the door mirrors.
Shift into any position except 
.
See also:
Resetting the Display
Reset the engine oil life display if you have performed the maintenance service.
1. Turn the ignition switch to ON
.
2. Display the engine oil life by repeatedly pressing the SEL/RESET button.
...
Fastening a Seat Belt
After adjusting a front seat to the proper position, and while sitting
upright and well
back in the seat:
Adjusting the Seats
1. Pull the seat belt out slowly.
2. Insert the latch plat ...
Wiper Blades
Check the condition of the wiper blades at least every six months.
Replace them if you find signs of cracking in the rubber, areas that are getting
hard, or if they leave streaks and unwiped areas ...